Jib Crane

Jib Cranes consist of a horizontal load supporting boom, which is attached to a pivoting vertical column that is either free standing or building mounted. They enable lifting and lowering of a load within a fixed arc of rotation. Jib Cranes can be provided in a variety of capacities and configurations including motorized rotation. Below are the basic types of Jib Cranes. Contact our Customer Service Department to determine the type of Jib Crane best suited for your application and facility.

Jib cranes are versatile efficient solution for moving material within an individual work station, for transferring materials from work area to work area for serving as auxiliary lifting devices under overhead cranes.
 

WALL MOUNTED TYPES

(Tension Bracket Jib Crane)

• Capacity from 250 kgs. To 3000 kgs.
• Span Up to 6 mtrs.
• 180 degree rotation.
• Utilized astd. l-beam.
• Most economical style.
• Allow max. usage of the area.

FULL CANTILEVER JIB CRANE

• Capacity from 250 kgs. To 3000 kgs.
• Span Up to 6 mtrs.
• 180 degree rotation.
• Offers greatest potential under boom clearance because it can be installed closer to the ceiling than other wall mounted jib cranes.
• Allow max. usage of the work area

SUPPORTED PILLAR

• Capacity from 250 kgs. To 5000 kgs.
• Std. Span Up to 5 mtrs.
• 360 degree rotation.
• Designed plants assembly is secured by mean of anchor bolts to prescribed reinforced concrete foundation with the number of anchor bolts varying with the capacity of the crane.
• The pipe column is designed to give max. strength and min. defection to resist bending, buelsling and crushing.
• The top bearing assembly utilities tapered roller bearing, provided with grease fitting for proper lubriction.

FREE STANDING JIB CRANES

Free Standing Jib Cranes are engineered to stand by themselves on a concrete foundation without building support. They allow for 360o rotation and can be base plate mounted, foundation mounted, or sleeve insert mounted. Standard capacities are from 1/2 to 5 tons. Special orders are possible up to 15 tons.

MAST TYPE JIB CRANES

Mast Type Jib Cranes offer a low cost alternative to achieve 360o rotation without a large mounting foundation as is required by free standing models. The mast is supported top and bottom by the overhead building steel and floor. Mast Type Jib Cranes are available in 2 designs, full cantilever and drop cantilever. Standard capacities are from 1/2 to 5 tons. Special capacities, heights and spans are also possible.

WALL MOUNTED JIB CRANES

Wall Mounted Jib Cranes are capable of 200o rotation. Their design can be either cantilever or tie rod supported. Wall Mounted Jib Cranes offer an economical alternative to Mast or Free Standing jibs, and with capacities standard up to 5 tons. Special capacities and longer spans are also possible.